| Specification for roll paper dividing and cutting machine |
A web slitter machine
1, open the electrical isolation switch (set in the electric control cabinet), according to EMERCENCY STOP RESET and READY TO RUN MACHINE RUN to open the key button (main operating table) to check voltage (380V), the current is correct and stable.
2, open the hydraulic system power switch (set in the main hydraulic drive frame), check the main hydraulic drive system level and pressure table display is correct and stable.
3, open the pneumatic shut-off valve (set in the pneumatic control cabinet under the intake pipe), check the pressure is correct (not less than 6.0bar, less stable).
Second, web slitter set control
1, according to the film type single cut plan thickness, length, width of cut set menu.
2 lift from the corresponding PDF file of BOPP films.
3, the length of the corresponding specification set rewind film width.
4, select the appropriate winding station, adjust the pressure roller and the pressure roller arm, installation of suitable size of paper core.
Three, web Slitter feeding, and then through the film, the film
1, feeding: cuts, according to a single request, in accordance with the rules of the road, according to the actual situation, in time hanging shelf to take appropriate parent roll, according to corona surface and choose the direction in Yi Mei web slitting machine reel and use the control button to clamp the steel core, steel core supporting arm and the left lane.
2, transmembrane: if there is no film easy to mildew web Slitter, should be carried out through the membrane. The Yi beauty web Slitter wear film device and the function key, the original film is fastened on the penetrating eye link, Rev.
Move through the button to make the film film along the cutting process to smooth the distribution in each roller.
The film down. When it is 3, then the film reel of paper cutting machine film, roll gap in the vacuum sealing film sets, first pick take set to work position, hand Yi Mei reel of paper cutting machine first traction roll film flattening and switch on the upper part of the vacuum pump suction membrane adsorption film formation, the film stage access, posted on the double-sided adhesive tape and cut the tape excess membrane, the unwinding frame film flattening and start a lower vacuum pump membrane, the formation of adsorption, scoring in the paper tape layer and smooth film, the joints should be neat, wrinkle free, then turn off the vacuum pump, and Taiwan will open the non working position.
Four, web Slitter starts running
1, change specifications, inside and outside the new roller arm around, notice in all personnel leave the machine ready to run state, ready to run.
2, the main operating platform of ANTI-STAIC BARS in AUTO, READY TO RUN opened, start the machine running operation guide.
Five, roll paper cutting control
In cutting operation, careful monitoring, to observe the operation cutting effect, the correct cutting speed, unwinding tension, contact pressure and bending, traction and scrap, edge guide for appropriate adjustments to control.
Six, roll slitting and rewinding
1, in which the outer end of the winding machine stop running after the button will remove the membrane membrane on the membrane prepared unloading trolley, cut and paste the membrane with sealing glue film.
2, release the button to use the suction head to loosen card, check the film roll paper core if not new, if the core head is still stuck in the paper is to remove the film by hand.
3, to ensure all membrane away from Chuck's small car, button, to improve the use of loading arm winding film, install the corresponding paper core, the film is neatly affixed to the paper core, once cut a.
Seven, web Slitter parking lot
1, when the operation to set the length of the film, the device will automatically stop.
2, in the operation of the device, according to the needs of processing STOP parking.
3, when you need a quick stop, press MACHINE STOP key is greater than 2S.
4, when there is an accident, such as equipment or man-made emergency situations according to the emergency stop emergency stop. |
| |
|
|
|
|
网站建设：
